• products-banner

Product

TPO based Skin-friendly thermoplastic elastomer Si-TPV2150-70A

SILIKE Si-TPV® 2150-70A thermoplastic elastomer is a dynamic vulcanized thermoplastic silicone-based elastomer which made by a special compatible technology to help silicone rubber dispersed in TPO evenly as a 2~3 micron particles under microscope. Those unique materials combine the strength, toughness and abrasion resistance of any thermoplastic elastomer with desirable properties of silicone: softness, silky feel, UV light and chemicals resistance which can be recycled and reused in traditional manufacturing processes.


Product Detail

Product Tags

Sample service

Video

Description

 

SILIKE Si-TPV® 2150-70A thermoplastic elastomer is a dynamic vulcanized thermoplastic silicone-based elastomer which made by a special compatible technology to help silicone rubber dispersed in TPO evenly as a 2~3 micron particles under microscope. Those unique materials combine the strength, toughness and abrasion resistance of any thermoplastic elastomer with desirable properties of silicone: softness, silky feel, UV light and chemicals resistance which can be recycled and reused in traditional manufacturing processes.

 

 Si-TPV® 2150-70A can excellent bond to PE, PP and other similar polar substrates, It is a product developed for soft touch overmolding on wearable electronics, accessory cases for electronic devices, automotive, high-end TPE, TPE wire industries ......

  

Typical mechanical properties

Test item Property Unit Result
ISO 37 Elongation at Break % 650
ISO 37 Tensile Streng Mpa 10.4
ISO 48-4 Shore A Hardness Shore A 73
ISO1183 Density g/cm3 1.03
ISO 34-1 Tear Strength kN/m 49
 -- Compression deformation(23℃) % 25
-- MI( 190℃,10KG) g/10 min 68
-- Melt Temperature Optimum 220
-- Mold Temperature Optimum 25

Characteristics

Compatibility                                                      SEBS, PP, PE, PS, PET, PC, PMMA, PA

Benefits

1. Provide the surface with Unique silky and skin-friendly touch, soft hand feeling with good mechanical properties.

2. Not contain plasticizer and softening oil, no bleeding / sticky risk, no odors. 

3. UV stable and chemical resistance with excellent bonding to TPE and similar polar substrates.

4. Reduce dust adsorption, oil resistance and less pollute.

5. Easy to demould, and easy to handle.

6. Durable abrasion resistance & crush resistance & scratch resistance.

7. Excellent flexibility and kink resistance.

.....

How to use

Directly injection molding.

• Injection Molding Processing Guide

Drying Time

2–4 hrs

Drying Temperature

60–80°C

Feed Zone Temperature

180–190°C

Center Zone Temperature

190–200°C

Front Zone Temperature

200–220°C

Nozzle Temperature

210–230°C

Melt Temperature

220°C

Mold Temperature

20–40°C

Injection Speed

Med

 These process conditions may vary with individual equipment and processes.

 

• Secondary Processing

As a thermoplastic material, Si-TPV® material can be secondary processed for ordinary products.

 

• Injection Molding Pressure

The holding pressure largely depends on the geometry, thickness and gate location of the product. The holding pressure should be set to a low value at first, and then slowly increase until no related defects are seen in the injection molded product. Due to the elastic properties of the material, excessive holding pressure may cause serious deformation of the gate part of the product.

 

• Back pressure

It is recommended that the back pressure when the screw is retracted should be 0.7-1.4Mpa, which will not only ensure the uniformity of melt melting, but also ensure that the material is not severely degraded by shear. The recommended screw speed of Si-TPV® is 100-150rpm to ensure the complete melting and plasticization of the material without material degradation caused by shear heating.

Remark

 1.Si-TPV elastomer products can be manufactured using standard thermoplastic manufacturing processes, including overmolding or co-molding with plastic substrates such as PP, PE.

2.The extremely silky feel of Si-TPV elastomer does not require additional processing or coating steps.

3.The process conditions may vary with individual equipment and processes.

4. A desiccant dehumidifying drying is recommended for all drying.

Package

25KG / bag, craft paper bag with a PE inner bag

Shelf life and storge

Transport as non-hazardous chemical. Store in a cool and well ventilated place.

Original characteristics remain intact for 12 months from the production date if kept in recommend storage.


  • Previous:
  • Next:

  • FREE SILICONE ADDITIVES AND Si-TPV SAMPLES MORE THAN 100 GRADES

    Sample type

    $0

    • 50+

      grades Silicone Masterbatch

    • 10+

      grades Silicone Powder

    • 10+

      grades Anti-scratch Masterbatch

    • 10+

      grades Anti-abrasion Masterbatch

    • 10+

      grades Si-TPV

    • 8+

      grades Silicone Wax

    Write your message here and send it to us